Hydrostatic test bench

1. Device description

The hydraulic test bench uses compressed air as the power source, and the output pressure is proportional to the driving air source pressure. By adjusting the pressure of driving air source, the corresponding liquid pressure can be obtained. According to the different pressure of the specimen, the computer automatically adjusts the driving gas pressure by inputting the experimental data, and the high-pressure pump produces high-pressure liquid. After the pressure control system, the high-pressure pipeline is transported to the specimen for static pressure test and blasting test.

2. Scope of application

Used for all kinds of compressor housing, automobile hose, hydraulic hose assembly, metal pipeline, oil pipeline, automobile steering pipe, brake pipe, air conditioning pipe, fuel pipe, cooling water pipe, radiator, warm air Hose, hydraulic equipment, condenser, evaporator, air conditioning filter element hose, turbo charging system hose, automobile brake pump, cylinder block, engineering hydraulic hose, aviation hose and manifold, hard pipe, joint, valves, pressure instruments, pressure vessels, pressure transmitters and other products of the pressure strength bursting test and destructive test equipment. The test media used by the equipment (such as CHF202, ATF oil, PAG oil, automotive brake fluid, clean water, etc.) can be selected according to the actual situation.

3. Reference standards

GB/T7939 GB/T5568 GB/T3683 GB/T12722 GB/T14904 GB/T20461 GB/T16897 GB/T15908 GB/T5568 GB/T10544 GB/T7127 ISO6803 ISO6802 ISO11425

4 Main technical performance indicators

No. Item Requirement Performance Counter Remarks
1. Subject pipe fitting or pressure vessel

2. Functional blasting and pressure resistance test

3. Test medium water, hydraulic oil or other agreed media

4. Supercharging gas drive liquid booster pump

5. Working pressure 10-60MPa (higher pressure consult the customer service of this site)

6. Maximum pressure 70MPa

7. Medium, ambient temperature room temperature according to the actual working condition
8. High voltage test interface ZG1/4 is configured according to the working condition
9. Driving air source pressure 0.65-0.8mpa

10. The water injection pump power supply is 220V

11. Control mode Manual/Automatic optional