Carbon dioxide charging machine

First, equipment principle

Automatic charging machine, 0.5L/1L/2L and other kinds of crack tube (φ38-51) and small gas cylinder, digital display table can be set high pressure and low pressure lower limit pressure, so as to achieve the lower limit pressure automatic start, higher than the upper limit pressure automatically stop purpose.

Ii. Scope of application

High pressure charging, gas cylinder high pressure filling, etc

Carbon dioxide, N2O, refrigerant, etc

Iii. Main technical parameters:

1. Filling medium: liquid filling and filling (40L seamless cylinder from air source, inverted use)

2. Filling pressure: 20mpa

3. Filling weight: 0.3-1.7KG (set according to pressure)

4. Import size: gas cylinder joint

5. Interface size: It can be equipped with small gas cylinder quick joint or customized joint

6. Driver port: 12MM PU hose quick-plug port

7. Driving requirements: compressed air 0.6-0.8MPa, 0.7m ³/min

8. Power supply voltage: 220V

Iv. Introduction to operation procedures

Connect air source, power source, carbon dioxide source
Connect the aerated bottle
Set the charging pressure
Press the “Start” button and the device will be loaded
Automatically stop when the pressure is set
Close the charging valve
Remove the charging piece and replace the other charging piece
Open the charging valve and the device will automatically start charging

This kind of equipment is non-standard equipment, the specific equipment parameters, shape, price shall be subject to the technical requirements