Hydraulic test bench for wellhead installation

Equipment introduction

Wellhead hydraulic test bench is suitable for tree, valve, manifold, downhole tool seal performance and hydraulic strength test. Pressure sensor, pressure recorder and mechanical pressure gauge can be used for pressure signal acquisition and pressure indication, through the pressure drop method for sealing performance. This device can be customized according to the pressure and test performance. The control mode is manual control and automatic control

Scope of application

Downhole tools, petroleum and petrochemical valves, manifolders, wellhead pressure devices

Reference standard

API 11D1; SY/T 6222; SY/T 5106; SY/T 5404; SY/T 5625; SY/T 5871.

System composition

The system consists of low pressure test pump, high pressure test pump, pneumatic diplet, high pressure stop valve, pipeline, pressure gauge, high pressure stop valve, pressure recorder, cabinet and so on

Main technical parameters

Test medium: water, oil and other liquid medium; (Please consult other media)

Pressure range: 0~210MPa; (For other pressure ranges, please consult)

Constant pressure range: 10%~100%FS;

Test temperature: room temperature;

Pressure measurement accuracy: ±0.5%FS;

Pressure control accuracy: ±2%FS;

Driving air: 0.5MPa≤P≤1.0MPa;

Power supply voltage: AC380V/50Hz.