Bursting disc bursting fatigue and forming test bench

Product introduction

Bursting disc bursting fatigue and forming test bench is mainly used to examine the sealing performance of bursting disc and bursting disc components, bursting pressure, fatigue life, using computer automatic control, with high pressure air and water as the detection medium, the test parts placed in specific tooling, according to the test pressure is divided into four levels, to ensure the accuracy of each level of pressure, through the computer automatic control of the whole detection process, Each pressure point can be accurately collected, according to the pressure and test curve to obtain the test results, equipment equipped with temperature sensor and manual unloading valve, reasonable design, high degree of automation, is necessary for scientific research institutions, testing institutes and manufacturers testing equipment.

Reference standard

GB 567-2012 “Bursting Disc Safety Device”

BS EN 14797-2006 explosion-proof pressure reducer

Scope of application

Bursting disc, bursting disc assembly, pressure relief disc and other safety accessories

Equipment composition

This set of testing equipment is composed of computer acquisition system and power control system.

Technical parameter

1 Customer air supply: 0.5-0.8MPa

2 Test pressure range: 0-10MPa

3 Measurement accuracy: ±0.5%FS

4 Pressure control accuracy: ±2%

5 Pressure holding time: can be set arbitrarily

6 Pressure value recording: automatic

7 Test medium: clean high-pressure air or nitrogen

8 Medium temperature: room temperature

9 Control mode: closed-loop PID control

10 Report form: Microsoft Office-Excle