Valve hydraulic testing machine

Equipment introduction

Valve water pressure testing machine is used to test the strength of valve water pressure. The water driven by compressed air can be pressurized. By adjusting the pressure of the driving air source, the corresponding liquid pressure can be obtained. According to the different pressure of the valve, adjust the driving force, the high pressure pump produces the corresponding pressure of the high pressure liquid, through the pressure control system, by the high pressure pipeline to the valve, the pressure test, this set of equipment needs the user’s own fixture tightening platform or flange to meet the test of different types of valves.

Scope of application

Suitable for valve and flowmeter shell sealing performance test, valve body strength test. The equipment is mainly used for the sealing performance test before the new valve goes online or after the repair of the old valve. Widely used in quality testing units, product quality testing stations, scientific research institutions and a variety of valve production, development and research fields.

Main technical parameters

1. Subject: Valve

2. Work capacity: strength test, tightness test

3. Test medium: water (compressed air)

4. Working pressure: 0-2.5MPa, 0-4MPa, 0-6MPa, 0-10MPa, 0-20MPa, 0-30MPa, 0-40MPa, 0-60MPa, 0-100MPa, 0-150MPa (Test pressure needs to be specified)

5. Equipment tooling: Users should prepare it by themselves

6. Supercharging mode: gas drive booster pump

7. Compressed air: 0.5-0.8MPa

8. Power source: AC 220V