Valve gas tight test bench – waterlogged
Equipment introduction
The equipment is used for valve water pressure and air tightness test, the compressed air drive can be used to pressurize water and gas, through the adjustment of driving air source pressure, you can get the corresponding liquid pressure. According to the different pressure of the valve, adjust the driving force, the high pressure pump produces the corresponding pressure of the high pressure liquid or gas, through the pressure control system, by the high pressure pipeline to the valve, pressure test, this set of equipment is equipped with a clamping platform, clamping platform can be immersed in water test.
Scope of application
Suitable for valve and flowmeter shell sealing performance test, valve body strength test. The equipment is mainly used for the sealing performance test before the new valve goes online or after the repair of the old valve. Widely used in quality testing units, product quality testing stations, scientific research institutions and a variety of valve production, development and research fields.
Reference standard
ISO5028 “Pressure test of Industrial valves”
GB/T13927-2008 “General valve pressure test”
JB/T9092-999 “Valve Inspection and Test”
API598.2004 “Valve inspection and testing”
Api6d-2008 Specification for Piping Valves
Main technical parameters
1. Subject: Valve
2. Work capacity: strength test, tightness test
3. Test medium: water (compressed air)
4. Working pressure: 0-2.5MPa, 0-4MPa, 0-6MPa, 0-10MPa, 0-20MPa
(Test pressure needs to be specified)
5. Equipment tooling: Equipped with tooling DN50-DN300(optional)
6. Supercharging mode: gas drive booster pump
7. Compressed air: 0.5-0.8MPa
6. Power source: AC 220V
Copyright © gltcn.com | GLTCN