Valve pressure tester – Petroleum industry

Equipment introduction

Equipment with oil in the valve water pressure and gas tightness test, the use of compressed air drive can be pressurized water and gas, through the adjustment of driving air source pressure, you can get the corresponding liquid pressure. According to the different pressure of the valve, adjust the driving force, the high pressure pump produces the corresponding pressure of the high pressure liquid or gas, through the pressure control system, by the high pressure pipeline to the valve, pressure test, this set of equipment needs the user’s own fixture to test

Scope of application

Suitable for valve and flowmeter shell sealing performance test, valve body strength test. The equipment is mainly used for the sealing performance test before the new valve goes online or after the repair of the old valve. Widely used in quality testing units, product quality testing stations, scientific research institutions and a variety of valve production, development and research fields.

Reference standard

ISO5028 “Pressure test of Industrial valves”

GB/T13927-2008 “General valve pressure test”

JB/T9092-999 “Valve Inspection and Test”

API598.2004 “Valve inspection and testing”

Api6d-2008 Specification for Piping Valves

Main technical parameters

Main technical parameters

1. Subject: Valve

2. Work capacity: strength test, tightness test

3. Test medium: water (compressed air)

4. Working pressure: 0-210MPa (Test pressure needs to be specified)

5. Equipment tooling: provided by the user

6. Supercharging mode: gas drive booster pump

7. Compressed air: 0.5-0.8MPa

6. Power source: AC 220V