Carbon dioxide charging machine

1. Equipment introduction

Carbon dioxide charging machine, used to pressurize the carbon dioxide in the low pressure large container into the high pressure small container, can be used to inflate the 0.5L/1L/2L/3L/5L gas cylinder and reaction kettle, digital display table can be set high pressure upper limit pressure and low pressure lower limit pressure, so as to realize the purpose of automatic start below the lower limit pressure, higher than the upper limit pressure automatically stop.

Ii. Scope of application

High pressure filling and filling of carbon dioxide cylinders

N2O gas cylinder high pressure filling

High pressure charge of carbon dioxide reactor

Carbon dioxide high-pressure cleaning

Iii. Main technical parameters:

1. Filling medium: liquid filling and filling (40L seamless cylinder/adiabatic cylinder from air source)

2. Filling pressure: 15mpa

3. Filling weight: 0.3-1.7KG (set according to pressure)

4. Import size: gas cylinder joint

5. Interface size: It can be equipped with small gas cylinder quick joint or customized joint

6. Driver port: 12MM PU hose quick-plug port

7. Driving requirements: compressed air 0.6-0.8MPa, 0.7m ³/min

8. Power supply voltage: 220V

Iv. Introduction to operation procedures

Connect air source, power source, carbon dioxide source
Connect the aerated bottle
Set the charging pressure
Press the “Start” button and the device will be loaded
Automatically stop when the pressure is set
Close the charging valve
Remove the charging piece and replace the other charging piece
Open the charging valve and the device will automatically start charging

This kind of equipment is non-standard equipment, the specific equipment parameters, shape, price shall be subject to the technical requirements