Air drive hydraulic power system

1. Equipment introduction

The equipment is driven by compressed air to supercharge the liquid at normal pressure, with the highest pressure up to 30MPa. The pipeline system adopts non-welded connection, this product adopts pneumatic hydraulic pump, manual control, the output pressure can be adjusted, used for hydraulic support emulsion high pressure filling, high pressure hydraulic oil pump, explosion-proof occasions, the equipment can be customized according to the user’s specific use of pressure.

Two, equipment composition

The system is composed of gas-liquid booster pump, pneumatic binary, high pressure stop valve, pipeline, pressure gauge, high pressure stop valve, cabinet body, etc.

Three, the main technical parameters

Maximum pressure: 30Mpa
Working pressure: 20Mpa
Driving pressure: 0.3-0.8mpa
Supercharging factor: 40 times
Water tank: 12L built-in stainless steel
Normal flow rate: 6 L/MIN
Outlet thread: ZG3/8 (optional)
Noise: < 75dB
Control mode: manual control
Connection mode: thread type
Case material: stainless steel frame type
Dimensions: about 55*40*63cm
Weight: about 35-40KG

Four, equipment characteristics

Compressed air is used as the power source, and the output pressure is proportional to the pressure of the driving air source. By adjusting the pressure of driving air source, the corresponding liquid pressure can be obtained. When the driving air source pressure and liquid pressure balance, the pneumatic booster pump will stop charging, the output liquid pressure is stable on the preset pressure. Therefore, it has the characteristics of explosion-proof, adjustable output pressure, small size, light weight, simple operation, reliable performance and wide application range.