Hydraulic test bench – Computer controlled type

Equipment introduction

The hydraulic test bench is used for hydraulic pressure test and blasting test of pressure parts. The whole equipment is composed of three parts: computer control part, booster power source part and test box part. The whole test process is controlled by computer. The test data and curve parameters can be displayed in real time, can automatically save the test results, and can print any test report, through the pressure control system, by the high pressure pipeline to be installed in the test box in the pressure parts, static pressure test and blasting test, check the sealing performance and pressure resistance of the pressure parts.

Scope of application

All kinds of hoses, hose, hydraulic hose assembly, compressor housing, automobile hose, metal pipeline, oil pipeline, automobile steering pipe, brake pipe, air conditioning pipe, fuel pipe, cooling water pipe, radiator, warm air Pressure strength bursting test and destructive test of hose, hydraulic equipment, condenser, evaporator, air conditioning filter element hose, turbo charging system hose, automobile brake pump, cylinder block, engineering hydraulic hose, aviation hose and manifold, hard pipe, joint, valve, pressure instrument, pressure vessel, pressure transmitter and other products

Technical parameters:

1. Test function: pressure test, blasting test

2 Test pressure: 2.5MPa, 4MPa, 6MPa, 10MPa, 25MPa, 40MPa, 60MPa, 100MPa, 120MPa, 150MPa, 240MPa, 300MPa, 400MPa

3. Test medium: water, hydraulic oil or customer’s agreed medium

4. Test station: 1 station

5. Measurement accuracy: 0.5%FS

6. Control mode: Manual

7. Driving pressure: 5-8bar

8.. Power source: 220V 50Hz

9. Ambient temperature: normal temperature

Equipment characteristics

a All components are installed in a closed box structure, simple structure, safe and reliable connection, control panel is located at the front, easy to observe and operate.

b can be arbitrarily set single or multi-stage pressure holding test, or can be directly blasting after pressure holding, the pressure boost speed can remain constant.

c machine itself built-in mechanical pressure switch, output pressure can be set by pneumatic switch, when the output pressure reaches the set value, the supercharger automatically stop.

d Built-in high pressure check valve, filter, etc., to ensure the safety and reliability of the machine.

e Control machine is simple, the machine all use pneumatic control, safe and reliable.

f Low maintenance cost, good economy.