Hydraulic test bench – manual control type

Equipment introduction

Water pressure test bench for pressure parts of the water pressure test, blasting test, the whole equipment is composed of two parts, booster power source part and test box part, the equipment is manually controlled, the high pressure pump is driven by compressed air, according to the different pressure of the specimen, adjust the driving gas pressure, high pressure pump to produce high pressure liquid, through the pressure control system, It is transported by high pressure pipeline to the pressure parts in the test box. Static pressure test and blasting test are carried out to check the sealing performance and pressure resistance of the pressure parts.

Scope of application

All kinds of hoses, hose, hydraulic hose assembly, compressor housing, automobile hose, metal pipeline, oil pipeline, automobile steering pipe, brake pipe, air conditioning pipe, fuel pipe, cooling water pipe, radiator, warm air Pressure strength bursting test and destructive test of hose, hydraulic equipment, condenser, evaporator, air conditioning filter element hose, turbo charging system hose, automobile brake pump, cylinder block, engineering hydraulic hose, aviation hose and manifold, hard pipe, joint, valve, pressure instrument, pressure vessel, pressure transmitter and other products

Technical parameters:

1. Test function: pressure test, blasting test

2 Test pressure: 2.5MPa, 4MPa, 6MPa, 10MPa, 25MPa, 40MPa, 60MPa, 100MPa, 120MPa, 150MPa, 240MPa, 300MPa, 400MPa

3. Test medium: water, hydraulic oil or customer’s agreed medium

4. Test station: 1 station

5. Accuracy of pressure gauge: 1.6

6. Control mode: Manual

7. Driving pressure: 5-8bar

8. Ambient temperature: normal temperature

Equipment characteristics

a All components are installed in a closed box structure, simple structure, safe and reliable connection, control panel is located at the front, easy to observe and operate.

b Manual valve control, more quickly cut off the supercharger air drive trachea, so that the supercharger immediately stop.

c machine itself built-in mechanical pressure switch, output pressure can be set by pneumatic switch, when the output pressure reaches the set value, the supercharger automatically stop.

d Built-in high pressure check valve, filter, etc., to ensure the safety and reliability of the machine.

e Control machine is simple, the machine all use pneumatic control, safe and reliable.

f Low maintenance cost, good economy.